Members Login
Username 
 
Password 
    Remember Me  
SignFreak! → SignFreak → Seiko ColorPainter | HP 9000 | OCE → Carriage Bearings
 

Topic: Carriage Bearings

Post Info
Vic
Member
Status: Offline
Posts: 7
Date:
Carriage Bearings
Permalink  
Hi. I have one big problem with my printer, where one of the carriage bearings is broken. I need to know how to change the carriage bearings (8 units). This information does not come in the service manual (at least, not in the one i have).
The printer cannot work without a new bearing, so this information is very urgent.
Thanks


__________________
cs6060
Senior Member
Status: Offline
Posts: 172
Date:
Permalink  
it is lot of work. basically you will have to take head carriage out of the printer.

most important thing in this process is to take care of metal belt (that you don't "hurt" it)!

all other is time consuming!!


bearings you can buy in specialized shop in your town.
only thing is that it has to have this specification:

- Diameter of inside: 4 mm

- Diameter of outside 12 mm

- Width: 4 mm

- Metal sealed type

- Typical static bearable pressure: 347N

- Typical dynamic bearable pressure: 959N



Sorry for this late reply - wife ban me from internet....

__________________

Print Long and Prosper
 
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
 
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard