I was printing a lot of stuff lately, and the indicator on the panel dropped from 17% to 2% for few inks pretty quickly. But now i printed even more and it's still showinf 2%.
So the question is, is the indicator wrong, or is it printing with the ink that's left in the system. if so it's a lot of ink.
Pretty much this is where the chip stops at. Then system wait for the bags to run low and signal out of ink. You can remove each container with 2% and shake gently for any leftover ink in the cartridge. i have had 2% for days and its calling for more ink. Sometimes i will pull out at 2% and save for hard times or small jobs.
